CURRENT PRICE LIST - FLOOR LAMPS (THROUGH SPRING 2019)
Slender floor lamp made with oak wood, alabaster, and warm dimmable LEDs that are rated for 30,000 hours. The LEDs are oriented to provide a back-lit illumination, providing a warm ambience to a room environment.
Dimensions: 64" x 8" x 8"
Extremely low-profile walnut floor lamp with floating light element with embedded LEDs. Rotatable dimmer on main arm that can dim LEDs from 0-100% brightness. The floating light element is off-balanced, creating an extended orientation from the lamp body.
Dimensions: 72" x 40" x 10"
Ash floor lamp made from a single over-sized ash dowel and having a brass accent plate located at the bottom of the slot. An LED lighting element sits flush within the cut-out and is rated for 40,000 hours.
Dimensions: 48" x 6" x 6"
Floor lamp with hanging lighitng element made from ash and powder-coated steel. A dual-dimmable LED lighting elements are positioned in oppositely facing upward and downward directions to create a balanced and uniform glow within a room environment.
Dimensions: 70" x 24" 18"
Over-sized minimalist floor lamp made from oak and steel. A dimmable LED lighting element that spans almost 72 inches in length positioned behind a Lexan-protected woven diffuser to create a continuous uniform glow.
Dimension: The overall curvature reaches 90° and a total height of about 70". The arm has a width and depth of about 1.5" x 1.5".
Oak floor lamp with balanced light arm that can be continuously rotated 360 degrees for unique lighting of a room environment. The light arm is completely dimmable through a dimmer on the main arm.
Dimensions: 72" x 14" x 10"
Slender over-sized minimalist curved floor lamp made with oak, steel, and cloth shade. Powered by a traditional incandescent bulb, the lamp provides a 360° warm glow.
Dimensions: 74" x 16" x 28"
Ash dowel floor lamp made with brass hardware and an embedded dimmable ceramic LED lighting element. The LED is embedded into a top arm having a total length of about 36 inches. The top arm is rotatable relative to a base arm, allowing the top arm to be reoriented at a variety of angles relative to the base arm to allow for custom positioning of the LED.